In the present work, a comprehensive parametric study for establishing contact mechanics of instrumented normal spherical indentation on homogeneous materials and materials with plastically graded surface layer (PGSL) was undertaken by dimensional analysis and finite element modeling. The spherical indentation response for homogeneous materials can be described only by two dimensionless parameters: strain hardening exponent and a unified parameter that can describe effects of both the normalized yield strength and the normalized indentation depth. The influences of these two parameters were investigated for a wide range of engineering materials, and the results may be used as an estimate of loading response and pile-up/sink-in behavior when the material properties are known. In the materials with PGSL, a linear gradient in yield strength, and no variation in elastic modulus and strain hardening exponent were explored. The indentation response of the materials with PGSL can be described only by three dimensionless parameters: the normalized indentation depth, the dimensionless strength gradient parameter, and the normalized PGSL thickness. The effects of these three parameters were studied systematically. The normalized pile-up/sink-in parameter is found to be an increasing function of the strength gradient parameter. The normalized pile-up/sink-in parameter increases (decreases) with increasing PGSL thickness for a fixed positive (negative) gradient case at large indentation depth. The results also indicate that the materials with positive PGSL can bear more loads and have significantly more resistance to contact crack formation. [DOI:10.1016/j.ijsolstr.2011.10.018]

This article was published as:
Yuan FP;Jiang P;Xie JJ;Wu XL.Analysis of spherical indentation of materials with plastically graded surface layer.INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 49(3-4):527-536(2012)